email: info@moetryplay.com
-
Airplane Children’s Outdoor Playground
Airplane themed children’s outdoor playground equipment with S shaped slide and single open slide.
View now
-
-
-
A fun place for whole family. We provide play equipment for children. -
Our product range perfectly cover what a childcare center need, either new center or existing one. -
Play can have a special therapeutic value for ill children in hospital or pediatric therapy center. -
Playgrounds bring the parents and children together to relax, play and make friends. -
Playgrounds make hotels more family-friendly and encourage families to visit and stay. -
Our products help children learn about history and future through all kinds of interactive play.
-
How to Install EPDM Rubber Flooring for Playground Surface
Release time:
2025-04-08 17:14
Source:
EPDM (Ethylene Propylene Diene Monomer) rubber flooring are commonly used for playgrounds, sports areas, and outdoor surfaces. It has soft surface, offer protection for children in play areas, either indoors or outdoor. It requires several key steps in the EPDM floor installation to ensure durability, safety, and aesthetics. Here's a step-by-step guide:
Scroll down to see video guide
✅ Materials & Tools Needed:
-
EPDM granules (colored or black)
-
PU binder (polyurethane glue)
-
SBR base granules (for base layer)
-
Trowel or screed
-
Mixing tools (mixer or hand tools)
-
Protective gloves and mask
-
Measuring tools (ruler, level)
-
Roller or compactor (optional for large areas)
-
Primer (optional for better adhesion)
-
Mold or edge formers (if shaping edges)
🛠️ Step-by-Step Installation Guide:
1. Surface Preparation
-
Ensure the base surface is clean, dry, and level. It can be concrete, asphalt, or compacted crushed stone.
-
Repair cracks or holes if necessary.
-
Apply a primer if you're installing over concrete or asphalt for better bonding.
2. Base Layer (Optional but Recommended for Outdoor Areas)
-
Mix SBR rubber granules with PU binder (typically 20:1 ratio).
-
Pour and spread the mixture using a trowel to a thickness of 5-30 mm.
-
Let it cure for at least 24 hours.
3. Mixing EPDM Top Layer
-
Mix EPDM granules with PU binder (usually a 5–10% binder to granules ratio by weight).
-
Mix thoroughly until all granules are evenly coated.
4. Applying the EPDM Layer
-
Pour the mixture onto the cured base layer.
-
Spread evenly with a steel trowel, maintaining uniform thickness (usually 8–15 mm).
-
Use a soapy solution on the trowel to prevent sticking and achieve a smooth finish.
5. Edge Finishing
-
Use edge molds or steel rulers to define clean edges if not confined by borders.
-
Smooth edges before the surface begins to cure.
6. Curing
-
Allow the surface to fully cure for 24–48 hours depending on temperature and humidity.
-
Avoid water contact or heavy use during this time.
🧼 Post-Installation Care
-
Sweep regularly to keep it clean.
-
Avoid harsh chemicals.
-
Recoat or patch damaged areas as needed.
🔧 Pro Tips:
-
Work in small batches to prevent premature curing.
-
Choose dry weather for installation—avoid rainy or very humid days.
-
Use color-separation strips if designing patterns or multi-color zones.
Video Link: https://www.youtube.com/watch?v=j9S2S84sVSk (Contact us to send video to you if you cannot watch it here)
Related Products
You might be interested in
Create a safe and joyful
learning & playing space!
